Yixing Haiqun Machinery Technology Co., Ltd.
yixing haiqun machinery co., ltd
Add to Cart
SA516 Gr60 89mm Flat Dished Heads GB Stainless Steel Dished Tank
PRODUCT DETELS
SA516 Gr60 is a specification for carbon steel plates used in pressure vessel applications. It is a common grade of carbon steel with good weldability and moderate strength. The "Gr60" designation indicates a minimum tensile strength of 60,000 psi (415 MPa).
"89mm" refers to the thickness of the plates used for fabricating the dished heads. In this case, the dished heads are made from SA516 Gr60 plates that are 89mm thick.
"Flat dished heads" typically refer to dished heads with a flat, or nearly flat, shape. These heads are commonly used in various pressure vessel applications to seal the ends of cylindrical vessels.
"GB" stands for "Gauge Board," which is a term used in some countries to refer to the thickness of the plate. However, it is not clear how "GB" is specifically related to the stainless steel dished tank you mentioned. It's possible that it could refer to a different standard or specification, but without further information, it's difficult to provide more specific details.
"Stainless steel" indicates the material used for the dished tank. Stainless steel is a corrosion-resistant alloy that contains a minimum of 10.5% chromium. It is commonly used in various industries, including food processing, chemical processing, and pharmaceuticals, where corrosion resistance is essential.
Overall, based on the information provided, it appears that the dished tank you mentioned is made from SA516 Gr60 carbon steel plates with a thickness of 89mm, and the tank itself is constructed using stainless steel material.
1. About quality: We will check the quality of each batch of goods before shipping. If there are quality problems with the products received, or quality problems caused by express transportation, please contact us in time.
2. About the model: Before placing an order, please communicate with the sales or customer service staff about the required product specifications.
3. About after-sales: The company provides comprehensive after-sales and usage guidance and strives to solve customers' questions and needs.
The scope of products
Applicable to various building decoration industries
Widely used in electric power, metallurgy, food, pharmaceutical, petrochemical, water treatment equipment and light industry equipment. The company can also undertake the processing of incoming drawings and samples according to customer requirements, and customize products of different specifications.
production workshop
equipment Exhibition
A corner of the warehouse
One-stop ordering of head products
Non-standard customization In stock for two days Customized for seven days
SPECIFICATIONS
| Brand Name: | HaiQun |
| Diameter: | 89mm--10000mm |
| Thickness: | 2mm--300mm |
| Reduction Ratio: | about 10% |
| Material: | Carbon Steel, Stainless Steel, Duplex, Super Duplex, Aluminum, Nickel and Nickel Alloys, Copper and Copper Alloys, Titanium and Its Alloys, Zirconium and all cladded material combinations. |
| Forming method: | Hot forming,cold forming |
| Surface Treatment: | Sand Blasting,Pickling,oil,discaling |
| Inspection: | UT,RT,MT,PT,TOFD. |
| Applicable Standard: | ASME ,PED and GB |
| Certificate: | ISO9001,ISO45001,OHSAS18001 |
| Applications: | Such as oil, chemical industry, water conservancy, electric power, |
| Package: | Wooden cases ,wooden pallet,Steel pallet or as per customers requirement |
| Customized Product: | Available |
| Material | Carbon Steel; Stainless Steel; Special Steel |
| Size | 50-10000mm |
| Thickness | 2mm--300mm |
| Surface Treatment | 1. Intermediate & Final stage Heat Treatments; 2. Sand / Shot Blasting after Heat Treatment; 3. Weld Edge Preparation (Manual & Machined) |
| Reduction ratio | About 10% |
| Certificate | ISO9001 |
| Technology | 1. Cold & Hot forming; 2. Hot Pressed Hemispheres and Cold Formed Segmental Hemispheres; |
| Applicable standard | ANSI, ASME, MSS, API, DIN, JIS, BS. AWWA |
| Test | 1. Liquid Penetrant Examination; 2. Ultrasonic Testing; 3. 100% Radiography Testing of weld seams; 4. Magnet Particle Examination; 5. Inspection under various Third party Inspection Agencies 6. NDT( after forming): DPT, RT, MPI, UT; 7. NDT: 100% DPT, UT & RT OF weld joint |
| Connection | Welding |
| Application | Pressure vessel |
PRODUCTS
FAQ
Q: Why choose us?
A: Our company has been in the header manufacturing business for more than thirty years. We have rich international experience and professionalism, and we can provide customers with a variety of high-quality header products.
Q: Can we provide OEM/ODM service?
A: Yes.Please feel free to contact us for further details.
Q: What are your terms of payment?
A: One is to telegraphic transfer 30% of the deposit before production the remaining 70% to the copy of the bill of lading;The other is an irrevocable 100% sight L/C
Q: Can we visit your factory?
A: A warm welcome.Once we have your itinerary we will arrange for a professional sales team to follow up your case.
Q: Can you provide samples?
A: Yes,the sample of general size is free of charge,but the buyer needs to pay the shipping fee.