Yixing Haiqun Machinery Technology Co., Ltd.
yixing haiqun machinery co., ltd
Add to Cart
30mm Cast Iron Hemispherical Dish End Ss316l Pressure Vessel Half Sphere Fire Pit
PRODUCT DETELS
A 30mm thick cast iron hemispherical dish end made of SS316L is being used as a pressure vessel half sphere for a fire pit.
30mm Thickness: The value "30mm" represents the thickness of the cast iron dish end. This thickness is crucial for ensuring the structural integrity and pressure-bearing capacity of the dish end in a pressure vessel application.
Cast Iron: Cast iron is a strong and durable material known for its excellent heat retention properties. It is commonly used in applications where high temperatures are involved, such as fire pits. However, it is important to note that cast iron is not typically used as a material for pressure vessels due to its brittleness and lower tensile strength compared to other materials like steel.
Hemispherical Dish End: A hemispherical dish end refers to an end cap or cover used to seal the ends of a vessel or container. It has a shape resembling a half-sphere or hemisphere. Hemispherical dish ends provide excellent stress distribution characteristics and are commonly used in pressure vessels.
SS316L: SS316L refers to a specific grade of stainless steel known as 316L. It is a low-carbon variant of stainless steel that offers excellent corrosion resistance, high-temperature strength, and good weldability. SS316L is commonly used in applications where resistance to corrosion and oxidation is important, such as pressure vessels.
Using a 30mm thick cast iron hemispherical dish end made of SS316L for a pressure vessel half sphere fire pit may not be a typical application. Cast iron is not commonly used as a material for pressure vessels due to its brittleness. It is important to ensure that the design, fabrication, and use of the fire pit comply with relevant safety standards and regulations to ensure the safe operation of the equipment.
Consulting with engineers or professionals experienced in pressure vessel design and fire pit construction is recommended for guidance specific to your requirements.
The scope of products
Applicable to various building decoration industries
Widely used in electric power, metallurgy, food, pharmaceutical, petrochemical, water treatment equipment and light industry equipment. The company can also undertake the processing of incoming drawings and samples according to customer requirements, and customize products of different specifications.
production workshop
equipment Exhibition
A corner of the warehouse
One-stop ordering of head products
Non-standard customization In stock for two days Customized for seven days
SPECIFICATIONS
| Brand Name: | HaiQun |
| Diameter: | 89mm--10000mm |
| Thickness: | 2mm--300mm |
| Reduction Ratio: | about 10% |
| Material: | Carbon Steel, Stainless Steel, Duplex, Super Duplex, Aluminum, Nickel and Nickel Alloys, Copper and Copper Alloys, Titanium and Its Alloys, Zirconium and all cladded material combinations. |
| Forming method: | Hot forming,cold forming |
| Surface Treatment: | Sand Blasting,Pickling,oil,discaling |
| Inspection: | UT,RT,MT,PT,TOFD. |
| Applicable Standard: | ASME ,PED and GB |
| Certificate: | ISO9001,ISO45001,OHSAS18001 |
| Applications: | Such as oil, chemical industry, water conservancy, electric power, |
| Package: | Wooden cases ,wooden pallet,Steel pallet or as per customers requirement |
| Customized Product: | Available |
| Material | Carbon Steel; Stainless Steel; Special Steel |
| Size | 50-10000mm |
| Thickness | 2mm--300mm |
| Surface Treatment | 1. Intermediate & Final stage Heat Treatments; 2. Sand / Shot Blasting after Heat Treatment; 3. Weld Edge Preparation (Manual & Machined) |
| Reduction ratio | About 10% |
| Certificate | ISO9001 |
| Technology | 1. Cold & Hot forming; 2. Hot Pressed Hemispheres and Cold Formed Segmental Hemispheres; |
| Applicable standard | ANSI, ASME, MSS, API, DIN, JIS, BS. AWWA |
| Test | 1. Liquid Penetrant Examination; 2. Ultrasonic Testing; 3. 100% Radiography Testing of weld seams; 4. Magnet Particle Examination; 5. Inspection under various Third party Inspection Agencies 6. NDT( after forming): DPT, RT, MPI, UT; 7. NDT: 100% DPT, UT & RT OF weld joint |
| Connection | Welding |
| Application | Pressure vessel |
PRODUCTS
Product shipping packaging
FAQ
Q: Why choose us?
A: Our company has been in the header manufacturing business for more than thirty years. We have rich international experience and professionalism, and we can provide customers with a variety of high-quality header products.
Q: Can we provide OEM/ODM service?
A: Yes.Please feel free to contact us for further details.
Q: What are your terms of payment?
A: One is to telegraphic transfer 30% of the deposit before production the remaining 70% to the copy of the bill of lading;The other is an irrevocable 100% sight L/C
Q: Can we visit your factory?
A: A warm welcome.Once we have your itinerary we will arrange for a professional sales team to follow up your case.
Q: Can you provide samples?
A: Yes,the sample of general size is free of charge,but the buyer needs to pay the shipping fee.